Hoverboard Repair Kit with BLUETOOTH and REMOTE - GREEN CIRCUITS

Repair Kit for 6.5in, 8in and 10in scooters (or any 350w hoverboard). Bluetooth is included in this kit. See the video below for a step-by-step installation guide.  All our parts are certified and ship from the U.S.   Parts included in this kit: 1x Main circuit (logic) board 2x Balance circuit boards (One with remote antenna) 2x Front LED lights 2x Indicator LED lights 1x charger port 1x switch power 1x Bluetooth circuit 1x Speaker 1x Remote for 6.5in, 8in and 10in all models 350w     

INSTRUCTIONS FOR CONNECTING THE BLUETOOTH MODULE:

The speaker plugs in to the WHITE plastic holder on the bluetooth module and the power cable from the mainboard gets connected to the RED plastic holder on the bluetooth module. WARNING: ***If you plug the speaker and power wires incorrectly, you run the risk of breaking your scooter.***

INSTRUCTION FOR CONNECTING THE REMOTE CONTROL MODULE:

All you have to do is to replace one of the balance circuits on your scooters with the new balance circuit that has the coil attached to it by simply unplugging the wires from it and unscrewing the 4 screws and the placing the new one in its place, screwing the 4 screws and plugging in the wires. Simple as that.

 Here is a video showing how to change these parts: